About Stainless Steel H-Beams

H section steel is a kind of cross section area allocation optimization, strong heavy than more reasonable economic section of high profile, because of H beam's cross section the same as the English letter "H" the name. Since the different parts of h-beam with orthogonal configuration, so H-beam in all directions has bending ability strong, easy construction, cost saving and structure light weight etc, has been widely used. 

904L Stainless Steel

Grade 904L is a non-stabilised low carbon high alloy austenitic stainless steel. The addition of copper to this grade gives it greatly improved resistance to strong reducing acids,particularly sulphuric acid. It is also highly resistant to chloride attack - both pitting / crevice corrosion and stress corrosion cracking.This grade is non magnetic in all conditions and has excellent weldability and formability.The austenitic structure also gives this grade excellent toughness, even down to cryogenic temperatures.

H-Beam's Features: 

1.Wide flange, high lateral stiffness.

2.H-beam has good bending resistance, about 5%-10% better than i-bar.

3.The two surfaces of flange are parallel to each other, which makes connection, processing and installation easy.

4.Compared with welding i-steel, H beam is low cost, high precision, small residual stress, no need for expensive welding materials and weld inspection, saving about 30% of the production cost of steel structure.

5.Under the same section load, the weight of hot-rolled H beam steel structure can be reduced by 15%-20% compared with traditional steel structure.

6.Compared with concrete structure, hot-rolled H beam steel structure can increase the usable area by 6%, reduce the dead weight by 20%-30%, and reduce the internal force of structure design.

7.H-beam can be processed into T beam, honeycomb beam can be combined to form a variety of sections, greatly meet the needs of engineering design and production.