About Stainless Steel H-Beams

H section steel is a kind of cross section area allocation optimization, strong heavy than more reasonable economic section of high profile, because of H beam's cross section the same as the English letter "H" the name. Since the different parts of h-beam with orthogonal configuration, so H-beam in all directions has bending ability strong, easy construction, cost saving and structure light weight etc, has been widely used. 

304/304L Stainless Steel

304 stainless steel is the most widely used chromium nickel stainless steel. As a widely used steel, it has good corrosion resistance, heat resistance, low temperature strength and mechanical properties; Good hot workability such as stamping and bending, no heat treatment hardening phenomenon (service temperature -196 ℃ ~ 800 ℃). It is corrosion-resistant in the atmosphere. If it is an industrial atmosphere or a heavily polluted area, it needs to be cleaned in time to avoid corrosion. Suitable for food processing, storage and transportation. It has good machinability and weldability.

304L stainless steel plate is better than 304 in pitting corrosion resistance at welding points or other treatment places. 304L is more corrosion resistant, with excellent corrosion resistance, heat resistance, low temperature strength and mechanical properties; Good hot workability such as stamping meandering, no heat treatment hardening scene (no magnetism, application temperature - 196 ° C ~ 800 ° C), and excellent grain boundary corrosion resistance after 304L welding or stress elimination; It can also adhere to excellent corrosion resistance without heat treatment, and the application temperature is - 196 ° c-800 ° C.

H-Beam's Features: 

1.Wide flange, high lateral stiffness.

2.H-beam has good bending resistance, about 5%-10% better than i-bar.

3.The two surfaces of flange are parallel to each other, which makes connection, processing and installation easy.

4.Compared with welding i-steel, H beam is low cost, high precision, small residual stress, no need for expensive welding materials and weld inspection, saving about 30% of the production cost of steel structure.

5.Under the same section load, the weight of hot-rolled H beam steel structure can be reduced by 15%-20% compared with traditional steel structure.

6.Compared with concrete structure, hot-rolled H beam steel structure can increase the usable area by 6%, reduce the dead weight by 20%-30%, and reduce the internal force of structure design.

7.H-beam can be processed into T beam, honeycomb beam can be combined to form a variety of sections, greatly meet the needs of engineering design and production.